Compare M5C vs Original Prusa MK4 3D Printer
Comparison between the best 3D printers
Choose the best 3D printer at the best price. The cheapest 3D printers are here.
Buy a 3D printer here with 3D Fila.
 |
 |
|
| Modelo | M5C[BUY M5C] |
Original Prusa MK4 3D Printer[BUY Original Prusa MK4 3D Printer] |
| Buy Filament forAnkerMake M5C | Buy Filament forPrusa Original Prusa MK4 3D Printer | |
| Estimated price | $399,00 | $1099,00 |
| Manufacturer | AnkerMake | Prusa |
| Release Year | 2023 | 2023 |
| Print Volume [mm] | 220x220x250 | 250x220x210 |
| Printer Size [mm] | 466x374x480 | 500x400x550 |
| Weight [kg] | 9,6 | 7 |
| Power Loss Recovery | YES | YES |
| Enclosed printer | NO | NO |
| Bed Leveling | Automatic | Automatic |
| Filament End Sensor | YES | YES |
| Bed type | Heated | Heated |
| Power supply system | Direct Drive | Direct Drive |
| Standard nozzle | 0,4 | 0,4 |
| Maximum Nozzle Temperature [°C] | 300 | 300 |
| Maximum Bed Temperature [°C] | 100 | 120 |
| Maximum printing speed [mm/s] | 500 | 180 |
| Filament holder | YES | YES |
| Camera for supervision | NO | NO |
| Recommended filaments | PLA, PETG, TPU, ABS, PA, PLA-CF, PETG-CF, PA-CF | PLA, ABS, PETG, PC, Nylon, Tritan, PP |
| Recommended slicers | AnkerMake Studio (macOS, Windows), Simplify3D, Ultimaker Cura, PrusaSlicer | Cura, Simplify, Slic3r, IdeaMaker, PrusaSlicer e outros |
| Maximum Resolution [mm] | 0,1 | 0,1 |
| Processor | Custom 32-bit xBuddy electronics with STM32 | |
| Display | Display touchscreen 3,5'' | |
| Power Supply | 350 W | 240 W |
| Connectivity | Wi-Fi, USB-C, Bluetooth | USB / Wi-Fi / internet via Prusa Connect |
| Operating systems | Windows, Linux e Macbook | Windows, Mac, Linux |
| Date of registration in the system | 2024-09-11 | 2023-06-06 |
| Release date | 2023 | 2023 |
| Extra features | The AnkerMake M5 printer stands out for its impressive print speed, reaching up to 500mm/s. It features AI print monitoring, an integrated camera for creating timelapses, auto-leveling bed with pressure sensor, direct extruder, flexible PEI-coated build plate, and Wi-Fi and USB-C connectivity. Assembly is quick and easy, and the printer is designed to deliver high print quality and ease of use. | The Original Prusa MK4 stands out with automatic first-layer calibration via Loadcell sensor, high-speed enabled by Input Shaper and Nextruder for precise prints. It includes quick-change nozzles, customizable UI, and Ethernet/Wi-Fi connectivity. It supports a wide range of materials, from PLA to flexibles. Equipped with a 32-bit xBuddy mainboard and precise stepper motors, it offers exceptional print quality, enhanced security, and remote printing options via Prusa Connect. |
| Support for multiple colors and materials (AMS and CFS) | NO | NO |
Notes * |
||
| Cost-benefit | 7 / 10 | 6 / 10 |
| Hardware | 3.6 / 10 | 3.6 / 10 |
| Tela | . | . |
| Print volume | 3 / 10 | 3 / 10 |
| Performance | 4 / 10 | 1 / 10 |
| [BUY M5C] | [BUY Original Prusa MK4 3D Printer] |
Conclusion |
| In comparing the AnkerMake M5C and the Original Prusa MK4 3D printers, several factors emerge that influence the decision for potential buyers. The AnkerMake M5C offers an excellent balance of performance and affordability, with a notable maximum printing speed of up to 500 mm/s, allowing for faster project completion. Its build volume, slightly less than that of the Prusa, is still adequate for most tasks, and it brings modern features like direct drive and automatic bed leveling. The printer is designed for user-friendliness, with quick assembly and a touchscreen interface, making it accessible even for beginners. Additionally, its cost-benefit ratio is favorable, landing it an 8 out of 10 in this category. In contrast, the Original Prusa MK4, while significantly more expensive, is recognized for its advanced features that contribute to exceptional print quality and precision. It utilizes technologies like Input Shaper and a Loadcell sensor for enhanced print accuracy. The inclusion of customizable parameters and various connectivity options, alongside its support for a wider range of materials, makes it a robust choice for those looking to delve deeper into 3D printing. However, its performance is rated lower in terms of speed and cost-effectiveness, with a performance rating of merely 2 out of 10. Ultimately, the choice between these two models hinges on the user’s priorities. For those seeking speed, ease of use, and a lower price point, the AnkerMake M5C represents a more advantageous option. Conversely, if superior print quality and advanced functionality are paramount, and budget is less of a concern, the Original Prusa MK4 stands out as the premium choice. |