Compare KP3S PRO V2 vs S1 PRO
Comparison between the best 3D printers
Choose the best 3D printer at the best price. The cheapest 3D printers are here.
Buy a 3D printer here with 3D Fila.
 |
 |
|
| Modelo | KP3S PRO V2 |
S1 PRO |
| Buy Filament forKingroon KP3S PRO V2 | Buy Filament forFLSUN S1 PRO | |
| Estimated price | $229,00 | $1500,00 |
| Manufacturer | Kingroon | FLSUN |
| Release Year | 2024 | 2024 |
| Print Volume [mm] | 220x220x250 | 320x320x430 |
| Printer Size [mm] | 420x400x450 | 450x450x1200 |
| Weight [kg] | 12,6 | 41 |
| Power Loss Recovery | NO | YES |
| Enclosed printer | NO | YES |
| Bed Leveling | Automatic | Automatic |
| Filament End Sensor | NO | YES |
| Bed type | Heated | Heated |
| Power supply system | Direct Drive | Direct Drive |
| Standard nozzle | 0,4 | 0,4 |
| Maximum Nozzle Temperature [°C] | 260 | 350 |
| Maximum Bed Temperature [°C] | 100 | 120 |
| Maximum printing speed [mm/s] | 350 | 1200 |
| Filament holder | YES | YES |
| Camera for supervision | NO | NO |
| Recommended filaments | PLA, PETG, TPU | PLA, PETG, TPU, ABS, ASA, Nylon, PC, PP, HIPS |
| Recommended slicers | Cura, Orca Slicer | FLSun Slicer 2.0, Orca Slicer |
| Maximum Resolution [mm] | 0,01 | 0,01 |
| Processor | ||
| Display | LCD Mono | Touchscreen 7'' |
| Power Supply | 300 W | 500W 110-240V, 50/60HZ |
| Connectivity | USB-C / MicroSD / Ethernet | Wi-Fi, USB, app FL Sun World |
| Operating systems | Windows, Mac, Linux | Windows, Mac |
| Date of registration in the system | 2025-03-18 | 2024-12-16 |
| Release date | 2024 | 2024 |
| Extra features | The Kingroon KP3S Pro V2 is a high-speed FDM 3D printer with Klipper firmware, ensuring fast and precise prints. It features linear rails on all axes, a Direct Drive extruder with a 9.5:1 gear ratio, and an efficient ceramic heater. It includes an inductive sensor for automatic bed leveling, a PEI magnetic bed, a built-in accelerometer for vibration calibration, and Wi-Fi, Ethernet, and USB connectivity for remote control. | The FLSUN S1 Pro is a high-speed Delta 3D printer, reaching up to 1200 mm/s with 40,000 mm/s² acceleration. It features a build volume of 320 mm (diameter) x 430 mm (height), a 350°C hotend, dual-zone heated bed up to 120°C, a 50°C heated chamber, and an active filament drying holder. It includes a camera for remote monitoring, integrated UPS for power-loss safety, a HEPA filter, and a 7 touchscreen interface. Perfect for large and complex projects. |
| Support for multiple colors and materials (AMS and CFS) | NO | NO |
Notes * |
||
| Cost-benefit | 7 / 10 | 7 / 10 |
| Hardware | 0.9 / 10 | 5.4 / 10 |
| Tela | . | . |
| Print volume | 3 / 10 | 4 / 10 |
| Performance | 3 / 10 | 9 / 10 |
Conclusion |