Compare Anet A8 V2 vs Bambu Lab P2S Combo
Comparison between the best 3D printers
Choose the best 3D printer at the best price. The cheapest 3D printers are here.
Buy a 3D printer here with 3D Fila.
 |
 |
|
| Model | Anet A8 V2 |
Bambu Lab P2S Combo |
| Printing Material | Filament | Filament |
| Estimated price | $129,00 | $799,00 |
| Date of registration in the system | ||
| Manufacturer | Anet | Bambu Lab |
| Release Year | 2021 | 2025 |
| Print Volume [mm] | 220x220x250 | 256x256x256 |
| Printer Size [mm] | 428x441x486 | 406x478x392 |
| Weight [kg] | 6,2 | 14,9 |
| Power Loss Recovery | NO | YES |
| Enclosed printer | NO | YES |
| Bed Leveling | Manual | Automatic |
| Filament End Sensor | NO | YES |
| Bed type | Heated | |
| Power supply system | Bowden | Direct Drive |
| Standard nozzle | 0,4 | 1,75 |
| Maximum Nozzle Temperature [°C] | 230 | 300 |
| Maximum Bed Temperature [°C] | 110 | |
| Maximum printing speed [mm/s] | 150 | 600 |
| Filament holder | YES | YES |
| Camera for supervision | NO | YES |
| Recommended filaments | PLA | PLA, TPU, TPE, HIPS, ABS, PETG, WOOD, PC, PA, PVA, ASA, PC ABS, PLA CF |
| Recommended slicers | Cura, Simplify, Slic3r, IdeaMaker | Bambu Studio |
| Maximum Resolution [mm] | 0,1 | 0,1 |
| Kinematics | - | - |
| Extruder Type | - | - |
| Klipper Firmware | NO | NO |
| Input Shaping | NO | NO |
| Max Volumetric Flow [mm³/s] | - | - |
| Power Supply | 110/220V / 250W | Max 1200 W @ 220 V / 1000 W @ 110 V |
| Connectivity | SD / USB | USB, Wifi |
| Release date | 2021 | 2025 |
| Extra features | The Anet A8 V2 is a Cartesian-XZ type 3D printer with a build volume of 220 x 220 x 250 mm, Ender 3 design and V-slot assembly. It has a 32-bit motherboard and touchscreen interface, promising ease of use. It uses open source firmware and has thermal failure protection. It stands out for its cable organization and the absence of a heated bed, focusing on energy savings and PLA printing. It comes with an external power adapter, aiming at greater safety, especially for beginners and educational use. | A refined CoreXY (256³) with 5" touchscreen, 1080p camera, AI error detection, auto flow-dynamics, and a PMSM servo extruder (up to 8.5 kg). 30-second quick-swap hotend and hardened-steel path for fiber-filled filaments. Adaptive Airflow keeps PLA overhangs clean with the door closed and supports ~50 °C chamber for engineering. AMS 2 Pro included: multi-color printing plus active venting filament drying. |
| Support for multiple colors and materials (AMS and CFS) | NO | YES |
Notes * |
||
| Cost-benefit | 8 / 10 | 7 / 10 |
| Hardware | 0 / 10 | 7.2 / 10 |
| Screen | . | . |
| Print volume | 10 / 10 | 10 / 10 |
| Performance | 7 / 10 | 10 / 10 |
Conclusion |