Compare A8 V2 vs H2S Combo
Comparison between the best 3D printers
Choose the best 3D printer at the best price. The cheapest 3D printers are here.
Buy a 3D printer here with 3D Fila.
 |
 |
|
| Model | A8 V2 |
H2S Combo |
| Printing Material | Filament | Filament |
| Buy Filament for Anet A8 V2 | Buy Filament forBambu Lab H2S Combo | |
| Estimated price | $129,00 | $1499,00 |
| Manufacturer | Anet | Bambu Lab |
| Release Year | 2021 | 2025 |
| Print Volume [mm] | 220x220x250 | 320x340x340 |
| Printer Size [mm] | 428x441x486 | 492x514x852 |
| Weight [kg] | 6,2 | 32,5 |
| Power Loss Recovery | NO | YES |
| Enclosed printer | NO | YES |
| Bed Leveling | Manual | Automatic |
| Filament End Sensor | NO | YES |
| Bed type | Heated | |
| Power supply system | Bowden | Direct Drive |
| Standard nozzle | 0,4 | 0,4 |
| Maximum Nozzle Temperature [°C] | 230 | 350 |
| Maximum Bed Temperature [°C] | 120 | |
| Maximum printing speed [mm/s] | 150 | 1000 |
| Filament holder | YES | YES |
| Camera for supervision | NO | NO |
| Recommended filaments | PLA | ABS, PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF, PA-CF, PET-CF |
| Recommended slicers | Cura, Simplify, Slic3r, IdeaMaker | Bambu Studio |
| Maximum Resolution [mm] | 0,1 | 0,1 |
| Processor | ||
| Display | Display touchscreen 2,8'' | Touchscreen 5'' |
| Power Supply | 110/220V / 250W | 330 W RMS |
| Connectivity | SD / USB | USB, Wifi |
| Operating systems | Windows, Mac, Linux | Windows, Linux e Macbook |
| Date of registration in the system | 2022-11-10 | 2025-10-10 |
| Release date | 2021 | 2025 |
| Extra features | The Anet A8 V2 is a Cartesian-XZ type 3D printer with a build volume of 220 x 220 x 250 mm, Ender 3 design and V-slot assembly. It has a 32-bit motherboard and touchscreen interface, promising ease of use. It uses open source firmware and has thermal failure protection. It stands out for its cable organization and the absence of a heated bed, focusing on energy savings and PLA printing. It comes with an external power adapter, aiming at greater safety, especially for beginners and educational use. | Enclosed CoreXY (340×320×340 mm) with active chamber up to 65 °C, 350 °C hotend, 120 °C bed. <50 um precision (Vision Encoder) and Auto Hole/Contour Compensation. 3 cameras + 23 sensors with AI and pre-flight checks. AMS 2 Pro: drying with auto vent, spool rotation, and RFID; multicolor ready. Auto-leveling, active vibration compensation, high-torque servo extruder, and stabilized flow for high speed and top quality. |
| Support for multiple colors and materials (AMS and CFS) | NO | YES |
Notes * |
||
| Cost-benefit | 6 / 10 | 7 / 10 |
| Hardware | 0.5 / 10 | 7.2 / 10 |
| Tela | . | . |
| Print volume | 3 / 10 | 4 / 10 |
| Performance | 1 / 10 | 8 / 10 |
Conclusion |