Compare SV04 IDEX vs KP3S PRO V2
Comparison between the best 3D printers
Choose the best 3D printer at the best price. The cheapest 3D printers are here.
Buy a 3D printer here with 3D Fila.
 |
 |
|
| Modelo | SV04 IDEX[BUY SV04 IDEX] |
KP3S PRO V2 |
| Buy Filament forSovol SV04 IDEX | Buy Filament forKingroon KP3S PRO V2 | |
| Estimated price | $259,00 | $229,00 |
| Manufacturer | Sovol | Kingroon |
| Release Year | 2021 | 2024 |
| Print Volume [mm] | 300x300x400 | 220x220x250 |
| Printer Size [mm] | 653x625x803 | 420x400x450 |
| Weight [kg] | 15 | 12,6 |
| Power Loss Recovery | YES | NO |
| Enclosed printer | NO | NO |
| Bed Leveling | Automatic | Automatic |
| Filament End Sensor | YES | NO |
| Bed type | Heated | Heated |
| Power supply system | DIrect Drive | Direct Drive |
| Standard nozzle | 0,4 | 0,4 |
| Maximum Nozzle Temperature [°C] | 260 | 260 |
| Maximum Bed Temperature [°C] | 100 | 100 |
| Maximum printing speed [mm/s] | 120 | 350 |
| Filament holder | YES | YES |
| Camera for supervision | NO | NO |
| Recommended filaments | PLA, TPU, TPE, HIPS, ABS, PETG, WOOD, PC, PA, PVA, ASA | PLA, PETG, TPU |
| Recommended slicers | Cura, Prusa Slicer, Orca | Cura, Orca Slicer |
| Maximum Resolution [mm] | 0,01 | 0,01 |
| Processor | ||
| Display | Touchscreen 4,3'' | LCD Mono |
| Power Supply | 500 W | 300 W |
| Connectivity | SD | USB-C / MicroSD / Ethernet |
| Operating systems | Windows, Mac, Linux | |
| Date of registration in the system | 2024-11-06 | 2025-03-18 |
| Release date | 2021 | 2024 |
| Extra features | The Sovol SV04 IDEX offers 3D printing with independent dual extruders (IDEX), enabling simultaneous multi-color or multi-material printing without filament waste. It features a 300 x 300 x 400 mm build volume, automatic bed leveling, and Titan direct extruders, ideal for flexible materials. Equipped with a flexible magnetic plate, filament run-out sensor, print recovery, and purge buckets for idle filament, it stands out as a versatile and practical option. | The Kingroon KP3S Pro V2 is a high-speed FDM 3D printer with Klipper firmware, ensuring fast and precise prints. It features linear rails on all axes, a Direct Drive extruder with a 9.5:1 gear ratio, and an efficient ceramic heater. It includes an inductive sensor for automatic bed leveling, a PEI magnetic bed, a built-in accelerometer for vibration calibration, and Wi-Fi, Ethernet, and USB connectivity for remote control. |
| Support for multiple colors and materials (AMS and CFS) | NO | NO |
Notes * |
||
| Cost-benefit | 7 / 10 | 7 / 10 |
| Hardware | 2.4 / 10 | 0.9 / 10 |
| Tela | . | . |
| Print volume | 4 / 10 | 3 / 10 |
| Performance | 1 / 10 | 3 / 10 |
| [BUY SV04 IDEX] |
Conclusion |