Compare Replicator Plus vs A1
Comparison between the best 3D printers
Choose the best 3D printer at the best price. The cheapest 3D printers are here.
Buy a 3D printer here with 3D Fila.
 |
 |
|
| Modelo | Replicator Plus |
A1[BUY A1] |
| Buy Filament forMakerbot Replicator Plus | Buy Filament forBambu Lab A1 | |
| Estimated price | $2099,00 | $700,00 |
| Manufacturer | Makerbot | Bambu Lab |
| Release Year | 2016 | 2023 |
| Print Volume [mm] | 165x295x195 | 256x256x256 |
| Printer Size [mm] | 410x528x441 | 385x410x430 |
| Weight [kg] | 18,3 | 8,3 |
| Power Loss Recovery | YES | YES |
| Enclosed printer | NO | NO |
| Bed Leveling | Automatic | Automatic |
| Filament End Sensor | YES | YES |
| Bed type | Heated | |
| Power supply system | Bowden | Direct Drive |
| Standard nozzle | 0,4 | 0,4 |
| Maximum Nozzle Temperature [°C] | 230 | 300 |
| Maximum Bed Temperature [°C] | 100 | |
| Maximum printing speed [mm/s] | 150 | 500 |
| Filament holder | YES | YES |
| Camera for supervision | YES | YES |
| Recommended filaments | PLA | PLA, PETG, TPU, PVA |
| Recommended slicers | MakerBot Print Software | SuperSlicer, PrusaSlicer, Cura, OrcaSlicer |
| Maximum Resolution [mm] | 0,1 | 0,1 |
| Processor | ||
| Display | Touchscreen 3,5 | |
| Power Supply | 110/220V / 240W | 350 W |
| Connectivity | USB / Wi-Fi | Wi-Fi, Bambu-Bus, Cartão Micro SD |
| Operating systems | Windows, Mac, Linux | Windows, Linux, Macbook |
| Date of registration in the system | 2022-11-15 | 2024-07-17 |
| Release date | 2016 | 2023 |
| Extra features | The Replicator Plus printer is easy to use and has very good print quality. Its software is user-friendly and powerful, with USB, Ethernet, Wi-Fi and support for printing via pen drive. With a safe design for an open frame printer, it is relatively quiet. The Smart Extruder+ detects filament end and pauses printing automatically, in addition to notifying via apps. It has a large print volume, with a non-heated and coated print bed for easy removal of parts. It also has a webcam for remote monitoring of prints. | The BambuLab A1 printer features fully automatic calibration, multi-color printing with the AMS system, active flow rate compensation, quick nozzle change with a clip, active motor noise cancellation, a build volume of 256x256x256 mm³, a maximum extruder temperature of 300°C, and a heated bed of up to 100°C. In addition, it has high precision, a machine health management system and an intuitive 3.5-inch touchscreen interface. |
| Support for multiple colors and materials (AMS and CFS) | NO | YES |
Notes * |
||
| Cost-benefit | 6 / 10 | 7 / 10 |
| Hardware | 2.5 / 10 | 5.4 / 10 |
| Tela | . | . |
| Print volume | 3 / 10 | 4 / 10 |
| Performance | 1 / 10 | 4 / 10 |
| [BUY A1] |
Conclusion |
| In conclusion, when comparing the MakerBot Replicator Plus and the Bambu Lab A1 3D printers, the Bambu Lab A1 emerges as the more attractive option for most users, especially considering its significantly lower price. The A1 not only offers a larger print volume but also boasts higher maximum temperatures for both the extruder and bed, enabling greater versatility in filament materials. Its modern features such as multi-color printing capabilities, active flow rate compensation, and a more user-friendly interface further enhance its appeal. While the Replicator Plus has a history of solid print quality and user-friendly software, it falls short in terms of print speed, material compatibility, and overall performance when compared to the A1. Additionally, the A1 benefits from newer technology and enhanced features, providing a more future-proof investment. Overall, for users prioritizing performance, features, and cost-effectiveness, the Bambu Lab A1 is clearly the superior choice. |