Compare Kobra 3 V2 Combo vs Adventurer 5M PRO
Comparison between the best 3D printers
Choose the best 3D printer at the best price. The cheapest 3D printers are here.
Buy a 3D printer here with 3D Fila.
 |
 |
|
| Model | Kobra 3 V2 Combo[BUY Kobra 3 V2 Combo] |
Adventurer 5M PRO |
| Printing Material | Filament | Filament |
| Buy Filament for Anycubic Kobra 3 V2 Combo | Buy Filament forFlashforge Adventurer 5M PRO | |
| Estimated price | $379,00 | $599,00 |
| Manufacturer | Anycubic | Flashforge |
| Release Year | 2025 | 2023 |
| Print Volume [mm] | 255x255x260 | 220x220x220 |
| Printer Size [mm] | 452x504x483 | 380x400x453 |
| Weight [kg] | 9,37 | 10,8 |
| Power Loss Recovery | YES | YES |
| Enclosed printer | NO | YES |
| Bed Leveling | Automatic | Automatic |
| Filament End Sensor | YES | YES |
| Bed type | Heated | Heated |
| Power supply system | Direct Drive | Direct Drive |
| Standard nozzle | 0,4 | 0,4 |
| Maximum Nozzle Temperature [°C] | 300 | 280 |
| Maximum Bed Temperature [°C] | 110 | 110 |
| Maximum printing speed [mm/s] | 600 | 600 |
| Filament holder | YES | YES |
| Camera for supervision | NO | NO |
| Recommended filaments | PLA/PETG/TPU (TPU is not compatible with the ACE Pro) | PLA, PETG, TPU, PLA-CF, PETG-CF |
| Recommended slicers | Anycubic Slicer, Cura, Orca Slicer | FlashPrint 5 |
| Maximum Resolution [mm] | 0,1 | 0,1 |
| Processor | 32 bits | |
| Display | Touchscreen 4,3'' | Touchscreen 4,3'' |
| Power Supply | 400 W | 350 W |
| Connectivity | USB, Wi-Fi, Cloud | Wifi / Ethernet / USB |
| Operating systems | Windows, Linux, Macbook | Windows, Linux, Macbook |
| Date of registration in the system | 2025-06-03 | 2024-07-09 |
| Release date | 2025 | 2023 |
| Extra features | The Kobra 3 V2 Combo brings notable upgrades: a wider Y-axis and SG15 bearings on the X-axis for greater stability, a redesigned nozzle to prevent leakage, a larger build volume (255x255x260 mm), a built-in 720p camera, and native support for 4- or 8-color printing with no extra hub required. All of this combined with LeviQ 3.0 auto-leveling and integrated filament drying. | The Flashforge Adventurer 5M PRO features advanced features such as a CoreXY motion system, direct drive extruder, print speeds of up to 600mm/s and maximum acceleration of 20,000mm/s². It features fast nozzle changes, automatic calibration, active vibration compensation, camera monitoring, time-lapse video, HEPA and carbon filters for particles and VOCs, and an intuitive 4.3-inch touchscreen interface. Ideal for printing materials such as PLA, PETG, ABS and TPU. |
| Support for multiple colors and materials (AMS and CFS) | YES | NO |
Notes * |
||
| Cost-benefit | 8 / 10 | 7 / 10 |
| Hardware | 5 / 10 | 4 / 10 |
| Tela | . | . |
| Print volume | 4 / 10 | 3 / 10 |
| Performance | 5 / 10 | 5 / 10 |
| [BUY Kobra 3 V2 Combo] |
Conclusion |