Compare KP3S PRO V2 vs Kobra S1 Combo
Comparison between the best 3D printers
Choose the best 3D printer at the best price. The cheapest 3D printers are here.
Buy a 3D printer here with 3D Fila.
 |
 |
|
| Modelo | KP3S PRO V2 |
Kobra S1 Combo[BUY Kobra S1 Combo] |
| Buy Filament forKingroon KP3S PRO V2 | Buy Filament forAnycubic Kobra S1 Combo | |
| Estimated price | $229,00 | $599,00 |
| Manufacturer | Kingroon | Anycubic |
| Release Year | 2024 | 2025 |
| Print Volume [mm] | 220x220x250 | 250x250x250 |
| Printer Size [mm] | 420x400x450 | 400x410x490 |
| Weight [kg] | 12,6 | 18 |
| Power Loss Recovery | NO | YES |
| Enclosed printer | NO | YES |
| Bed Leveling | Automatic | Automatic |
| Filament End Sensor | NO | YES |
| Bed type | Heated | Heated |
| Power supply system | Direct Drive | Direct Drive |
| Standard nozzle | 0,4 | 0,4 |
| Maximum Nozzle Temperature [°C] | 260 | 320 |
| Maximum Bed Temperature [°C] | 100 | 120 |
| Maximum printing speed [mm/s] | 350 | 600 |
| Filament holder | YES | YES |
| Camera for supervision | NO | NO |
| Recommended filaments | PLA, PETG, TPU | PLA, PETG, TPU[1], ABS, ASA |
| Recommended slicers | Cura, Orca Slicer | Anycubic Slicer Next, Orca Slicer |
| Maximum Resolution [mm] | 0,01 | 0,01 |
| Processor | ||
| Display | LCD Mono | Touchscreen 4,3'' |
| Power Supply | 300 W | |
| Connectivity | USB-C / MicroSD / Ethernet | USB, Wifi |
| Operating systems | Windows, Mac, Linux | Windows, Linux e Macbook |
| Date of registration in the system | 2025-03-18 | 2025-02-25 |
| Release date | 2024 | 2025 |
| Extra features | The Kingroon KP3S Pro V2 is a high-speed FDM 3D printer with Klipper firmware, ensuring fast and precise prints. It features linear rails on all axes, a Direct Drive extruder with a 9.5:1 gear ratio, and an efficient ceramic heater. It includes an inductive sensor for automatic bed leveling, a PEI magnetic bed, a built-in accelerometer for vibration calibration, and Wi-Fi, Ethernet, and USB connectivity for remote control. | The Anycubic Kobra S1 Combo is a fully enclosed CoreXY 3D printer with speeds up to 600mm/s and 20,000mm/s² acceleration. It features a 320°C hotend, native multicolor printing (4 to 8 colors with ACE Pro), and active filament drying. Equipped with LeviQ 3.0 auto-leveling, camera monitoring, AI failure detection, carbon filtration, and a 4.3 touchscreen, it ensures high-quality, efficient, and reliable 3D printing. |
| Support for multiple colors and materials (AMS and CFS) | NO | YES |
Notes * |
||
| Cost-benefit | 7 / 10 | 7 / 10 |
| Hardware | 0.9 / 10 | 8 / 10 |
| Tela | . | . |
| Print volume | 3 / 10 | 3 / 10 |
| Performance | 3 / 10 | 5 / 10 |
| [BUY Kobra S1 Combo] |
Conclusion |