Compare KP3S PRO V2 vs Comgrow T300
Comparison between the best 3D printers
Choose the best 3D printer at the best price. The cheapest 3D printers are here.
Buy a 3D printer here with 3D Fila.
 |
 |
|
| Model | KP3S PRO V2 |
Comgrow T300 |
| Printing Material | Filament | Filament |
| Buy Filament for Kingroon KP3S PRO V2 | Buy Filament forSovol Comgrow T300 | |
| Estimated price | $229,00 | $449,00 |
| Manufacturer | Kingroon | Sovol |
| Release Year | 2024 | 2024 |
| Print Volume [mm] | 220x220x250 | 300x300x350 |
| Printer Size [mm] | 420x400x450 | 503x631x831 |
| Weight [kg] | 12,6 | 17 |
| Power Loss Recovery | NO | YES |
| Enclosed printer | NO | NO |
| Bed Leveling | Automatic | Automatic |
| Filament End Sensor | NO | YES |
| Bed type | Heated | Heated |
| Power supply system | Direct Drive | Direct Drive |
| Standard nozzle | 0,4 | 0,4 |
| Maximum Nozzle Temperature [°C] | 260 | 300 |
| Maximum Bed Temperature [°C] | 100 | 100 |
| Maximum printing speed [mm/s] | 350 | 600 |
| Filament holder | YES | YES |
| Camera for supervision | NO | NO |
| Recommended filaments | PLA, PETG, TPU | PLA, PETG, PET, TPU, PA, ASA, PC, PLA CE, PA-CF, PET-CF |
| Recommended slicers | Cura, Orca Slicer | Bambu Studio, Super Slicer, Cura, Prusa Slicer, Orca Slicer |
| Maximum Resolution [mm] | 0,01 | 0,1 |
| Processor | 64 bit | |
| Display | LCD Mono | Touchscreen 5'' |
| Power Supply | 300 W | 150 W |
| Connectivity | USB-C / MicroSD / Ethernet | USB, WiFi |
| Operating systems | Windows, Mac, Linux | Windows, Linux, Macbook |
| Date of registration in the system | 2025-03-18 | 2024-05-10 |
| Release date | 2024 | 2024 |
| Extra features | The Kingroon KP3S Pro V2 is a high-speed FDM 3D printer with Klipper firmware, ensuring fast and precise prints. It features linear rails on all axes, a Direct Drive extruder with a 9.5:1 gear ratio, and an efficient ceramic heater. It includes an inductive sensor for automatic bed leveling, a PEI magnetic bed, a built-in accelerometer for vibration calibration, and Wi-Fi, Ethernet, and USB connectivity for remote control. | The Sovol Comgrow T300 printer stands out for its technological innovations and advanced features. With a print size of 300mm300mm350mm, the T300 offers true linear rails on all axes, ensuring greater stability. Its Klipper-based intelligent core and 64-bit microcomputer increase printing speed and quality through pressure advancement and input shaping. The extruder with a gear ratio of 6.5:1 allows for more precise material control, optimizing the printing of flexible materials. In addition, the T300 features a rapid filament cooling system with a high-speed fan and a circular duct piece that improves cooling efficiency. With a 4.3-inch high-refresh rate touchscreen and an 81-point automatic leveling system, the T300 simplifies the preparation and execution of 3D prints. |
| Support for multiple colors and materials (AMS and CFS) | NO | NO |
Notes * |
||
| Cost-benefit | 7 / 10 | 8 / 10 |
| Hardware | 0.9 / 10 | 3.6 / 10 |
| Tela | . | . |
| Print volume | 3 / 10 | 4 / 10 |
| Performance | 3 / 10 | 5 / 10 |
Conclusion |
| In comparing the KP3S PRO V2 and the Comgrow T300 3D printers, several key factors present a clear distinction between the two models. The KP3S PRO V2 offers a lower price point, making it accessible for budget-conscious users. However, its print volume, while adequate for smaller projects, is significantly less than that of the Comgrow T300. The KP3S PRO V2 boasts impressive features for its price, including a rapid maximum printing speed and lightweight construction, but it lacks some advanced functionalities like a filament end sensor and power loss recovery, which may impact usability in longer print jobs. On the other hand, the Comgrow T300 justifies its higher price with a larger print volume and advanced features such as a touchscreen interface, filament end sensor, and power loss recovery. It supports a wider range of filament materials, enhancing versatility for various projects. The T300 stands out in terms of performance, offering improved print stability and advanced cooling systems, which are crucial for high-quality prints. Ultimately, the choice depends on the user's specific needs: for those prioritizing budget and simplicity, the KP3S PRO V2 is a solid option, while the Comgrow T300 caters to those seeking performance and advanced features for more ambitious 3D printing tasks. |