Compare K2 Plus vs Comgrow T300
Comparison between the best 3D printers
Choose the best 3D printer at the best price. The cheapest 3D printers are here.
Buy a 3D printer here with 3D Fila.
 |
 |
|
| Modelo | K2 Plus[BUY K2 Plus] |
Comgrow T300 |
| Buy Filament forCreality K2 Plus | Buy Filament forSovol Comgrow T300 | |
| Estimated price | $1500,00 | $449,00 |
| Manufacturer | Creality | Sovol |
| Release Year | 2024 | 2024 |
| Print Volume [mm] | 350x350x350 | 300x300x350 |
| Printer Size [mm] | 495x515x640 | 503x631x831 |
| Weight [kg] | 33,5 | 17 |
| Power Loss Recovery | YES | YES |
| Enclosed printer | YES | NO |
| Bed Leveling | Automatic | Automatic |
| Filament End Sensor | YES | YES |
| Bed type | Heated | Heated |
| Power supply system | Direct Drive | Direct Drive |
| Standard nozzle | 0,4 | 0,4 |
| Maximum Nozzle Temperature [°C] | 350 | 300 |
| Maximum Bed Temperature [°C] | 120 | 100 |
| Maximum printing speed [mm/s] | 600 | 600 |
| Filament holder | YES | YES |
| Camera for supervision | YES | YES |
| Recommended filaments | PLA, PETG, PET, TPU, PA, ASA, PC, PLA CE, PA-CF, PET-CF | PLA, PETG, PET, TPU, PA, ASA, PC, PLA CE, PA-CF, PET-CF |
| Recommended slicers | Creality Print 5, Bambu Studio, Super Slicer, Cura, Prusa Slicer, Orca Slicer | Bambu Studio, Super Slicer, Cura, Prusa Slicer, Orca Slicer |
| Maximum Resolution [mm] | 0,1 | 0,1 |
| Processor | 64 bit | |
| Display | Touchscreen 4,3'' | Touchscreen 5'' |
| Power Supply | 1200 W | 150 W |
| Connectivity | USB / WIfi | USB, WiFi |
| Operating systems | Windows, Linux, Macbook | Windows, Linux, Macbook |
| Date of registration in the system | 2024-06-26 | 2024-05-10 |
| Release date | 2024 | 2024 |
| Extra features | The Creality K2 Plus 3D Printer stands out for its multicolor printing, large build volume (350x350x350 mm) and Apus Direct Drive extruder with tri-metal protection nozzle. It features automatic anti-tilt leveling, FOC closed-loop motors and active chamber heating. In addition, it has an intelligent CFS filament management system, cameras for calibration and monitoring, a 4.3-inch touchscreen and advanced sensors to optimize the printing process. | The Sovol Comgrow T300 printer stands out for its technological innovations and advanced features. With a print size of 300mm300mm350mm, the T300 offers true linear rails on all axes, ensuring greater stability. Its Klipper-based intelligent core and 64-bit microcomputer increase printing speed and quality through pressure advancement and input shaping. The extruder with a gear ratio of 6.5:1 allows for more precise material control, optimizing the printing of flexible materials. In addition, the T300 features a rapid filament cooling system with a high-speed fan and a circular duct piece that improves cooling efficiency. With a 4.3-inch high-refresh rate touchscreen and an 81-point automatic leveling system, the T300 simplifies the preparation and execution of 3D prints. |
| Support for multiple colors and materials (AMS and CFS) | YES | NO |
Notes * |
||
| Cost-benefit | 7 / 10 | 8 / 10 |
| Hardware | 8 / 10 | 4 / 10 |
| Tela | . | . |
| Print volume | 4 / 10 | 4 / 10 |
| Performance | 5 / 10 | 5 / 10 |
| [BUY K2 Plus] |
Conclusion |
| In comparing the Creality K2 Plus and the Sovol Comgrow T300 3D printers, both models bring impressive features and capabilities to the table, making them strong contenders in the market. The K2 Plus stands out for its larger print volume, enclosed design, and advanced features such as multicolor printing, automatic anti-tilt leveling, and an intelligent filament management system. Its higher maximum nozzle and bed temperatures allow for versatility in filament usage and ensure optimal printing conditions for a variety of materials. The addition of features like power loss recovery, a touchscreen interface, and comprehensive sensor systems reflects a commitment to enhancing the user experience and print quality. On the other hand, the Comgrow T300 offers a slightly smaller print volume but compensates with an impressive technological foundation, including true linear rails and a Klipper-based intelligent core that boost its speed and precision. It emphasizes stability and effective cooling systems, especially for flexible materials, positioning it well for specialized applications. Price is a significant factor, with the K2 Plus being considerably more expensive than the T300, which may influence the decision for budget-conscious buyers. However, the K2 Plus’s additional features and capacity could justify its cost for those who require enhanced performance and versatility. Both printers receive commendable ratings for cost-benefit and performance, indicating that they both provide substantial value within their respective price ranges. Ultimately, the choice between the Creality K2 Plus and the Sovol Comgrow T300 should hinge on the specific needs of the user: those prioritizing larger print size, enclosed printing, and advanced features may lean towards the K2 Plus, while users focused on technological precision, stability, and a more budget-friendly option may find the T300 to be a better fit. |