Compare K2 PRO Combo vs KP3S PRO V2
Comparison between the best 3D printers
Choose the best 3D printer at the best price. The cheapest 3D printers are here.
Buy a 3D printer here with 3D Fila.
 |
 |
|
| Model | K2 PRO Combo[BUY K2 PRO Combo] |
KP3S PRO V2 |
| Printing Material | Filament | Filament |
| Buy Filament for Creality K2 PRO Combo | Buy Filament forKingroon KP3S PRO V2 | |
| Estimated price | $1049,00 | $229,00 |
| Manufacturer | Creality | Kingroon |
| Release Year | 2025 | 2024 |
| Print Volume [mm] | 300x300x300 | 220x220x250 |
| Printer Size [mm] | 445x505x850 | 420x400x450 |
| Weight [kg] | 28,3 | 12,6 |
| Power Loss Recovery | YES | NO |
| Enclosed printer | YES | NO |
| Bed Leveling | Automatic | Automatic |
| Filament End Sensor | YES | NO |
| Bed type | Heated | Heated |
| Power supply system | Direct Drive | Direct Drive |
| Standard nozzle | 0,4 | 0,4 |
| Maximum Nozzle Temperature [°C] | 300 | 260 |
| Maximum Bed Temperature [°C] | 110 | 100 |
| Maximum printing speed [mm/s] | 23 | 350 |
| Filament holder | YES | YES |
| Camera for supervision | YES | YES |
| Recommended filaments | PLA, TPU, TPE, HIPS, ABS, PETG, WOOD, PC, PA, PVA, ASA | PLA, PETG, TPU |
| Recommended slicers | Creality Print | Cura, Orca Slicer |
| Maximum Resolution [mm] | 0,1 | 0,01 |
| Processor | dual-core ARM Cortex-A7 | |
| Display | Touchscreen 4,3'' | LCD Mono |
| Power Supply | 1200W | 300 W |
| Connectivity | USB, Wifi | USB-C / MicroSD / Ethernet |
| Operating systems | Windows, Linux e Macbook | Windows, Mac, Linux |
| Date of registration in the system | 2025-10-07 | 2025-03-18 |
| Release date | 2025 | 2024 |
| Extra features | K2 Pro Combo: Closed CoreXY (300×300×300 mm) with active heated chamber; CFS for multicolor (416 colors) with RFID and automatic swapping; two AI cameras for fault detection; localized auto-leveling; direct-drive extruder with magnetic cutter and quick-swap hotend (up to 300 °C); flexible PEI bed up to 110 °C; flow/filament sensors, power-loss recovery, and network printing with Creality Print. | The Kingroon KP3S Pro V2 is a high-speed FDM 3D printer with Klipper firmware, ensuring fast and precise prints. It features linear rails on all axes, a Direct Drive extruder with a 9.5:1 gear ratio, and an efficient ceramic heater. It includes an inductive sensor for automatic bed leveling, a PEI magnetic bed, a built-in accelerometer for vibration calibration, and Wi-Fi, Ethernet, and USB connectivity for remote control. |
| Support for multiple colors and materials (AMS and CFS) | YES | NO |
Notes * |
||
| Cost-benefit | 7 / 10 | 7 / 10 |
| Hardware | 8 / 10 | 0.9 / 10 |
| Tela | . | . |
| Print volume | 4 / 10 | 3 / 10 |
| Performance | 1 / 10 | 3 / 10 |
| [BUY K2 PRO Combo] |
Conclusion |