Compare K2 PRO Combo vs A1
Comparison between the best 3D printers
Choose the best 3D printer at the best price. The cheapest 3D printers are here.
Buy a 3D printer here with 3D Fila.
 |
 |
|
| Model | K2 PRO Combo[BUY K2 PRO Combo] |
A1[BUY A1] |
| Printing Material | Filament | Filament |
| Buy Filament for Creality K2 PRO Combo | Buy Filament forBambu Lab A1 | |
| Estimated price | $1049,00 | $700,00 |
| Manufacturer | Creality | Bambu Lab |
| Release Year | 2025 | 2023 |
| Print Volume [mm] | 300x300x300 | 256x256x256 |
| Printer Size [mm] | 445x505x850 | 385x410x430 |
| Weight [kg] | 28,3 | 8,3 |
| Power Loss Recovery | YES | YES |
| Enclosed printer | YES | NO |
| Bed Leveling | Automatic | Automatic |
| Filament End Sensor | YES | YES |
| Bed type | Heated | Heated |
| Power supply system | Direct Drive | Direct Drive |
| Standard nozzle | 0,4 | 0,4 |
| Maximum Nozzle Temperature [°C] | 300 | 300 |
| Maximum Bed Temperature [°C] | 110 | 100 |
| Maximum printing speed [mm/s] | 23 | 500 |
| Filament holder | YES | YES |
| Camera for supervision | YES | YES |
| Recommended filaments | PLA, TPU, TPE, HIPS, ABS, PETG, WOOD, PC, PA, PVA, ASA | PLA, PETG, TPU, PVA |
| Recommended slicers | Creality Print | SuperSlicer, PrusaSlicer, Cura, OrcaSlicer |
| Maximum Resolution [mm] | 0,1 | 0,1 |
| Processor | dual-core ARM Cortex-A7 | |
| Display | Touchscreen 4,3'' | Touchscreen 3,5 |
| Power Supply | 1200W | 350 W |
| Connectivity | USB, Wifi | Wi-Fi, Bambu-Bus, Cartão Micro SD |
| Operating systems | Windows, Linux e Macbook | Windows, Linux, Macbook |
| Date of registration in the system | 2025-10-07 | 2024-07-17 |
| Release date | 2025 | 2023 |
| Extra features | K2 Pro Combo: Closed CoreXY (300×300×300 mm) with active heated chamber; CFS for multicolor (416 colors) with RFID and automatic swapping; two AI cameras for fault detection; localized auto-leveling; direct-drive extruder with magnetic cutter and quick-swap hotend (up to 300 °C); flexible PEI bed up to 110 °C; flow/filament sensors, power-loss recovery, and network printing with Creality Print. | The BambuLab A1 printer features fully automatic calibration, multi-color printing with the AMS system, active flow rate compensation, quick nozzle change with a clip, active motor noise cancellation, a build volume of 256x256x256 mm³, a maximum extruder temperature of 300°C, and a heated bed of up to 100°C. In addition, it has high precision, a machine health management system and an intuitive 3.5-inch touchscreen interface. |
| Support for multiple colors and materials (AMS and CFS) | YES | YES |
Notes * |
||
| Cost-benefit | 7 / 10 | 7 / 10 |
| Hardware | 8 / 10 | 4.8 / 10 |
| Tela | . | . |
| Print volume | 4 / 10 | 4 / 10 |
| Performance | 1 / 10 | 4 / 10 |
| [BUY K2 PRO Combo] | [BUY A1] |
Conclusion |