Compare Genius Pro vs A1
Comparison between the best 3D printers
Choose the best 3D printer at the best price. The cheapest 3D printers are here.
Buy a 3D printer here with 3D Fila.
 |
 |
|
| Modelo | Genius Pro[BUY Genius Pro] |
A1[BUY A1] |
| Buy Filament forArtillery Genius Pro | Buy Filament forBambu Lab A1 | |
| Estimated price | $309,00 | $700,00 |
| Manufacturer | Artillery | Bambu Lab |
| Release Year | 2022 | 2023 |
| Print Volume [mm] | 220x220x250 | 256x256x256 |
| Printer Size [mm] | 430x390x590 | 385x410x430 |
| Weight [kg] | 9,6 | 8,3 |
| Power Loss Recovery | YES | YES |
| Enclosed printer | NO | NO |
| Bed Leveling | Automatic | Automatic |
| Filament End Sensor | YES | YES |
| Bed type | Heated | Heated |
| Power supply system | Direct Drive | Direct Drive |
| Standard nozzle | 0,4 | 0,4 |
| Maximum Nozzle Temperature [°C] | 240 | 300 |
| Maximum Bed Temperature [°C] | 120 | 100 |
| Maximum printing speed [mm/s] | 150 | 500 |
| Filament holder | YES | YES |
| Camera for supervision | NO | NO |
| Recommended filaments | PLA, PETG, Tritan, Flex, ABS | PLA, PETG, TPU, PVA |
| Recommended slicers | Cura, Simplify, Slic3r, IdeaMaker | SuperSlicer, PrusaSlicer, Cura, OrcaSlicer |
| Maximum Resolution [mm] | 0,1 | 0,1 |
| Processor | Ruby 32bit | |
| Display | Touchscreen TFT 3,5'' | Touchscreen 3,5 |
| Power Supply | 350 W | |
| Connectivity | SD / USB | Wi-Fi, Bambu-Bus, Cartão Micro SD |
| Operating systems | Windows, Mac, Linux | Windows, Linux, Macbook |
| Date of registration in the system | 2022-11-07 | 2024-07-17 |
| Release date | 2022 | 2023 |
| Extra features | The Artillery Genius Pro is a standout 3D printer with a fast-heating AC tempered glass print bed and a sleek design with a black aluminum base and blue accents. It features a Titan-style direct extruder and a 32-bit Ruby mainboard. Despite its advanced feature set, it struggles to maintain print quality, requiring frequent adjustments and calibrations, and its glued glass bed makes cleaning and replacement difficult. | The BambuLab A1 printer features fully automatic calibration, multi-color printing with the AMS system, active flow rate compensation, quick nozzle change with a clip, active motor noise cancellation, a build volume of 256x256x256 mm³, a maximum extruder temperature of 300°C, and a heated bed of up to 100°C. In addition, it has high precision, a machine health management system and an intuitive 3.5-inch touchscreen interface. |
| Support for multiple colors and materials (AMS and CFS) | NO | YES |
Notes * |
||
| Cost-benefit | 7 / 10 | 7 / 10 |
| Hardware | 3.2 / 10 | 5.4 / 10 |
| Tela | . | . |
| Print volume | 3 / 10 | 4 / 10 |
| Performance | 1 / 10 | 4 / 10 |
| [BUY Genius Pro] | [BUY A1] |
Conclusion |
| In comparing the Artillery Genius Pro and the Bambu Lab A1 3D printers, several key differences emerge that may influence a buyer’s decision based on their specific needs and budget. The Genius Pro is more budget-friendly and suitable for hobbyists or those new to 3D printing. It offers a decent print volume and a range of compatible materials, but users may find themselves frequently needing to adjust settings and calibrations to maintain print quality. Additionally, the challenges with the glued glass bed can be inconvenient during maintenance. On the other hand, the Bambu Lab A1, while more expensive, presents a significant upgrade in terms of performance and features. It boasts a larger print volume, a higher maximum nozzle temperature, and an advanced calibration system, which all contribute to greater versatility and ease of use. Its capabilities for multi-color printing and noise cancellation are particularly appealing for users seeking quality and efficiency. Overall, if cost is the primary concern and you are willing to invest time into learning and troubleshooting, the Genius Pro may be the right choice. However, for those willing to spend more for enhanced performance, reliability, and advanced features, the Bambu Lab A1 clearly stands out as the superior option. |