Compare Ender 3 S1 vs A8 V2
Comparison between the best 3D printers
Choose the best 3D printer at the best price. The cheapest 3D printers are here.
Buy a 3D printer here with 3D Fila.
 |
 |
|
| Modelo | Ender 3 S1[BUY Ender 3 S1] |
A8 V2 |
| Buy Filament forCreality 3D Ender 3 S1 | Buy Filament forAnet A8 V2 | |
| Estimated price | $399,00 | $129,00 |
| Manufacturer | Creality 3D | Anet |
| Release Year | 2021 | 2021 |
| Print Volume [mm] | 220x220x270 | 220x220x250 |
| Printer Size [mm] | 455x490x625 | 428x441x486 |
| Weight [kg] | 9,1 | 6,2 |
| Power Loss Recovery | YES | NO |
| Enclosed printer | NO | NO |
| Bed Leveling | Automatic | Manual |
| Filament End Sensor | YES | NO |
| Bed type | Heated | |
| Power supply system | Direct Drive | Bowden |
| Standard nozzle | 0,4 | 0,4 |
| Maximum Nozzle Temperature [°C] | 260 | 230 |
| Maximum Bed Temperature [°C] | 100 | |
| Maximum printing speed [mm/s] | 180 | 150 |
| Filament holder | YES | YES |
| Camera for supervision | NO | NO |
| Recommended filaments | PLA, TPU, PETG, ABS | PLA |
| Recommended slicers | Cura, Simplify, Slic3r, IdeaMaker, Creality Slicer e outros | Cura, Simplify, Slic3r, IdeaMaker |
| Maximum Resolution [mm] | 0,05 | 0,1 |
| Processor | ||
| Display | Display 4,3'' | Display touchscreen 2,8'' |
| Power Supply | 110/220V / 250W | |
| Connectivity | SD / USB | SD / USB |
| Operating systems | Windows, Mac, Linux | Windows, Mac, Linux |
| Date of registration in the system | 2023-03-28 | 2022-11-10 |
| Release date | 2021 | 2021 |
| Extra features | The Creality Ender 3 S1 printer stands out for its easy assembly and quiet operation. It has automatic bed leveling and a direct drive system, providing high-quality prints. The design is sleek, with flat cables in mesh sleeves and a magnetic bed. The Creality Sprite extruder is lightweight and developed in-house, supporting a maximum nozzle temperature of 260 degrees. It includes a filament run-out sensor and power loss recovery, with a dual Z-axis for greater support and stability. The build plate is flexible steel with PC coating, and the printer supports a wide variety of filaments. | The Anet A8 V2 is a Cartesian-XZ type 3D printer with a build volume of 220 x 220 x 250 mm, Ender 3 design and V-slot assembly. It has a 32-bit motherboard and touchscreen interface, promising ease of use. It uses open source firmware and has thermal failure protection. It stands out for its cable organization and the absence of a heated bed, focusing on energy savings and PLA printing. It comes with an external power adapter, aiming at greater safety, especially for beginners and educational use. |
| Support for multiple colors and materials (AMS and CFS) | NO | NO |
Notes * |
||
| Cost-benefit | 7 / 10 | 6 / 10 |
| Hardware | 2.4 / 10 | 0.6 / 10 |
| Tela | . | . |
| Print volume | 3 / 10 | 3 / 10 |
| Performance | 1 / 10 | 1 / 10 |
| [BUY Ender 3 S1] |
Conclusion |
| In comparing the Creality Ender 3 S1 and the Anet A8 V2, several key differences highlight the strengths and weaknesses of each 3D printer. **Performance and Features:** The Ender 3 S1 clearly outshines the A8 V2 in terms of performance and features. With automatic bed leveling, a filament end sensor, and power loss recovery, it caters well to users seeking reliability and ease of use. The direct drive system supports a wider variety of filaments and offers better print quality, with a maximum nozzle temperature of 260°C and a maximum printing speed of 180 mm/s. In contrast, the A8 V2 lacks these advanced features, relying instead on manual bed leveling and providing a maximum nozzle temperature of just 230°C, limiting its versatility primarily to PLA printing. **Build and Usability:** The Ender 3 S1 also scores higher with its modern design and ease of assembly. It features a flexible build plate and a higher resolution, contributing to better overall print quality. The A8 V2, while designed for beginners with a user-friendly touchscreen interface, sacrifices some performance for simplicity and cost-efficiency. **Cost Consideration:** The Ender 3 S1 is priced significantly higher than the A8 V2, which might deter budget-conscious users; however, the additional investment is justifiable for those prioritizing superior print quality and features. The A8 V2 serves as an economical option for those new to 3D printing or who primarily intend to print in PLA. **Overall Recommendation:** For users who require a reliable, feature-rich 3D printer capable of producing high-quality prints across various materials, the Ender 3 S1 is the clear choice. Conversely, for hobbyists or educators looking for a more affordable introduction to 3D printing with basic functionality, the Anet A8 V2 remains a valid option. Ultimately, your decision should be guided by your specific needs, budget, and expected use cases. |