Compare Ender 3 S1 Plus vs Replicator Plus
Comparison between the best 3D printers
Choose the best 3D printer at the best price. The cheapest 3D printers are here.
Buy a 3D printer here with 3D Fila.
 |
 |
|
| Modelo | Ender 3 S1 Plus[BUY Ender 3 S1 Plus] |
Replicator Plus |
| Buy Filament forCreality 3D Ender 3 S1 Plus | Buy Filament forMakerbot Replicator Plus | |
| Estimated price | $549,00 | $2099,00 |
| Manufacturer | Creality 3D | Makerbot |
| Release Year | 2022 | 2016 |
| Print Volume [mm] | 300x300x300 | 165x295x195 |
| Printer Size [mm] | 557x535x655 | 410x528x441 |
| Weight [kg] | 10,25 | 18,3 |
| Power Loss Recovery | YES | YES |
| Enclosed printer | NO | NO |
| Bed Leveling | Automatic | Automatic |
| Filament End Sensor | YES | YES |
| Bed type | Heated | |
| Power supply system | Direct Drive | Bowden |
| Standard nozzle | 0,4 | 0,4 |
| Maximum Nozzle Temperature [°C] | 260 | 230 |
| Maximum Bed Temperature [°C] | 100 | |
| Maximum printing speed [mm/s] | 150 | 150 |
| Filament holder | YES | YES |
| Camera for supervision | NO | NO |
| Recommended filaments | PLA, PETG, Tritan, Flex, ABS | PLA |
| Recommended slicers | Cura, Simplify, Slic3r, IdeaMaker | MakerBot Print Software |
| Maximum Resolution [mm] | 0,1 | 0,1 |
| Processor | ||
| Display | Display touchscreen 4,3'' | |
| Power Supply | 110/220V / 350W | 110/220V / 240W |
| Connectivity | SD / USB | USB / Wi-Fi |
| Operating systems | Windows, Mac, Linux | Windows, Mac, Linux |
| Date of registration in the system | 2022-11-04 | 2022-11-15 |
| Release date | 2022 | 2016 |
| Extra features | The Ender 3 S1 Plus 3D Printer offers quality prints with a build volume of 300x300x300 mm. It stands out for its "Sprite" extruder, automatic bed leveling and easy-to-use touchscreen. It has excellent safety features and simple assembly. In addition, it features temperature uniformity in the heated bed, suitable for various materials. | The Replicator Plus printer is easy to use and has very good print quality. Its software is user-friendly and powerful, with USB, Ethernet, Wi-Fi and support for printing via pen drive. With a safe design for an open frame printer, it is relatively quiet. The Smart Extruder+ detects filament end and pauses printing automatically, in addition to notifying via apps. It has a large print volume, with a non-heated and coated print bed for easy removal of parts. It also has a webcam for remote monitoring of prints. |
| Support for multiple colors and materials (AMS and CFS) | NO | NO |
Notes * |
||
| Cost-benefit | 6 / 10 | 6 / 10 |
| Hardware | 3.2 / 10 | 2.5 / 10 |
| Tela | . | . |
| Print volume | 4 / 10 | 3 / 10 |
| Performance | 1 / 10 | 1 / 10 |
| [BUY Ender 3 S1 Plus] |
Conclusion |
| When comparing the Creality 3D Ender 3 S1 Plus and the Makerbot Replicator Plus, there are several factors to consider beyond just the price. The Ender 3 S1 Plus presents a more formidable value proposition with its higher print volume, advanced features such as a "Sprite" extruder, and a heated bed suitable for a broader range of materials. Its automatic bed leveling and user-friendly touchscreen enhance the overall user experience, making it approachable for both beginners and experienced users. The model also boasts a robust performance potential with a maximum nozzle temperature of 260°C, aligning well with various filament types. In contrast, the Replicator Plus, while slightly more expensive and offering a solid print quality, has a smaller build volume and is limited to PLA filament. It comes equipped with a user-friendly software interface and smart features like the Smart Extruder+, but these may not compensate for its more constrained versatility and higher initial investment. Overall, the Ender 3 S1 Plus triumphs as a compelling option due to its balance of features, print capacity, and material compatibility, all offered at a significantly lower price point. This makes it the preferable choice for users seeking quality and versatility in their 3D printing endeavors. |