Compare BigTreeTech BIQU B1 vs Creality 3D LD0002H vs Sovol Comgrow T300
Comparison between the best 3D printers
Choose the best 3D printer at the best price. The cheapest 3D printers are here.
Buy a 3D printer here with 3D Fila.
 |
 |
 |
|
| Model | BigTreeTech BIQU B1 |
Creality 3D LD0002H[BUY LD0002H] |
Sovol Comgrow T300 |
| Printing Material | Filament | Resin | Filament |
| Estimated price | $269,00 | $230,00 | $449,00 |
| Date of registration in the system | |||
| Fabricante | BigTreeTech | Creality 3D | Sovol |
| Release Year | 2020 | 2021 | 2024 |
| Print Volume [mm] | 235x235x270 | 82x130x160 | 300x300x350 |
| Printer Size [mm] | 412x402x492 | 201x221x403 | 503x631x831 |
| Weight [kg] | 8,00 | 8,3 | 17 |
| Power Loss Recovery | YES | NO | YES |
| Maximum Resolution [mm] | 0,1 | 0,051 | 0,1 |
| Kinematics | - | - | - |
| Extruder Type | - | - | - |
| Klipper Firmware | NO | NO | NO |
| Input Shaping | NO | NO | NO |
| Max Volumetric Flow [mm³/s] | - | - | - |
| Power Supply | 24V / 360W | 40W | 150 W |
| Connectivity | SD / USB | SD | USB, WiFi |
| Release date | 2020 | 2021 | 2024 |
| Extra features | The BIQU B1 is an advanced 3D printer with a silent 32-bit BTT SKR V1.4 motherboard and ARM Cortex-M3 CPU, offering DIY interfaces (I2C, SPI, WiFi) and dual Z-axis. Its dual BTT B1 TFT35 V3.0 operating system allows real-time monitoring and multiple printing modes, including G-code visualization effects. It stands out for its BIQU SSS (Super Spring Steel), ensuring easy model adhesion and simplified removal, with the possibility of using it on both sides. It includes a filament sensor, automatically pausing printing in case of filament breakage. The multicolored RGB lights integrated into the hotend allow you to view the printing status even at night. Additional notes include the need for a BIQU-specific Type-C cable and extra interfaces for smart filament sensor and BL Touch. | The Creality LD-002H stands out with its 130 x 82 x 160 mm print volume and 2K monochrome screen, increasing print speed and detail. It includes an air filtration system, a metalized print plate for better adhesion, and compatibility with the ChiTuBox slicer. With an intuitive touchscreen interface and linear guide on the Z axis, it ensures precision and ease of use. | The Sovol Comgrow T300 printer stands out for its technological innovations and advanced features. With a print size of 300mm300mm350mm, the T300 offers true linear rails on all axes, ensuring greater stability. Its Klipper-based intelligent core and 64-bit microcomputer increase printing speed and quality through pressure advancement and input shaping. The extruder with a gear ratio of 6.5:1 allows for more precise material control, optimizing the printing of flexible materials. In addition, the T300 features a rapid filament cooling system with a high-speed fan and a circular duct piece that improves cooling efficiency. With a 4.3-inch high-refresh rate touchscreen and an 81-point automatic leveling system, the T300 simplifies the preparation and execution of 3D prints. |
| Support for multiple colors and materials (AMS and CFS) | NO | NO | NO |
Notes * |
|||
| Cost-benefit | 8 / 10 | 8 / 10 | 7 / 10 |
| Hardware | 1 / 10 | 2 / 10 | 3.2 / 10 |
| Screen | . | . | . |
| Print volume | 10 / 10 | 10 / 10 | 10 / 10 |
| Performance | 6 / 10 | 5 / 10 | 10 / 10 |
| [BUY LD0002H] |
Conclusion |